Blade vs. Mallet Putters: Which Should You Buy?

One looks like golf. The other looks like a kitchen gadget that rolled onto the green. A research-based comparison of blade vs. mallet putters, with current prices as of Nov 20, 2026.

Share

Golf Deal Hunter may earn a commission from links on this page, at no extra cost to you.

This is a research-based buying guide. The notes below come from published manufacturer and retailer specs, official product pages, and widely reported product details. We have not hands-on tested these products, and we are not inventing review scores or quotes.

Blade versus mallet is the putter argument that outlives the putt. One looks like golf. The other looks like a kitchen gadget that rolled onto the green. Neither one will keep your head still. What the shape actually changes, on paper, is toe hang, alignment, and how much the head resists a miss toward the heel or toe.

This is a comparison, not a stroke test and not a ranking of “best roll.” The examples are current models from our 2026 putter guide, plus two Cleveland HB SOFT 2 shapes that sit under $200. Prices are as of Nov 20, 2026.

Approximate prices as of Nov 20, 2026, and marked with a tilde (~). Some figures are sale prices that can end. Re-check the retailer page before you buy.

Quick picks for the shape question

If you want…Look atPublished setupApprox. price
A classic blade, on a budgetPING Scottsdale AnserTraditional Anser-style blade; other Scottsdale shapes are on the same sale~$198.98 (sale; was $259.99)
A current blade with toe hangOdyssey Ai-DUAL #1Crank hosel, significant toe hang, aimed at a more arcing stroke~$249.99 (sale; regular $349.99)
A face-balanced mallet under $200Cleveland HB SOFT 2 #15Full mallet, single-bend hosel, face-balanced, straight-stroke build~$159.99
A zero-torque malletOdyssey Ai-DUAL Square 2 Square JailbirdCenter shaft, toe-up rest, 360g, built to stay squarer to the path~$299.99 (sale; regular $399.99)

What the shapes actually change

A blade is a narrower, traditionally shaped head. Many blades have some toe hang, which means the toe points down when you balance the putter on your finger. Makers often pair that with an arcing stroke — a stroke that opens and closes a little. Odyssey is explicit about this on the Ai-DUAL #1: a crank hosel, “significant toe hang,” and a stroke “best suited to more face rotation and arc.” Cleveland is just as explicit on the HB SOFT 2 #1: plumber's neck, moderate toe hang, slight-arc stroke, 355-gram head, one-line alignment, pistol grip.

A mallet is a larger head, usually with more of its mass pushed out toward the perimeter. That is the published forgiveness story: more stability on a miss, and often a clearer alignment aid. Many mallets are face-balanced, which means the face stays more level when you balance the putter, and makers often pair that with a straighter stroke. Cleveland's HB SOFT 2 #15 is a full mallet with a single-bend hosel, face-balanced, three-line alignment, an oversize grip, and a 365-gram head, “best suited for a straight stroke.”

Zero-torque and lie-angle-balanced mallets are a third category. Odyssey's Square 2 Square Jailbird rests toe-up and is described as promoting a square face throughout the stroke. L.A.B.'s DF3 is sold on lie-angle balance — the idea that the putter stays square by itself when the lie is fit. Those designs can feel unusual if you have used a toe-hang blade for years. They are still mallets, with the larger-head alignment and stability story, plus a different balance idea.

A starting point, not a law

The common rule of thumb is blade for an arcing stroke, mallet for a straighter stroke. It is a useful starting point, and the makers above build heads to that idea. It is not a law. Some golfers aim a mallet better and still have a little arc. Some golfers want a blade because it looks like a putter, and then they cut every putt across the ball. Looks, aim, and a stroke you can repeat still do more work than the internet argument.

Length and lie are also not optional trivia. The Jailbird is offered in 33, 34, and 35 inches. The DF3 Stock is listed in 34 or 35. Cleveland's HB SOFT 2 stock lengths are 34 and 35, with custom length available, and a 20-gram counterweight in shafts 35 inches and over. A 35-inch putter that makes you crouch is the wrong nice putter.

What the current examples cost

If the question is “blade or mallet” and the budget is tight, Cleveland's official HB SOFT 2 price is ~$159.99 for both the #1 blade and the #15 mallet, with an estimated ship date of Nov 27, 2026, on the official pages when we checked. PGA TOUR Superstore also listed those models at ~$159.99. The Scottsdale Anser, a classic blade, is ~$198.98, down from $259.99, at Superstore, with other Scottsdale shapes on the same sale if you prefer a mallet.

If you want a 2026 Odyssey insert, the Ai-DUAL #1 blade is ~$249.99 (regular $349.99) and the Square 2 Square Jailbird mallet is ~$299.99 (regular $399.99) on the official Odyssey / Callaway pages. The L.A.B. DF3 Stock is ~$399 on L.A.B.'s official site, with a custom build listed elsewhere on the site at $499; the stock page can be sold out. Those four are covered in more detail in our 2026 putter guide.

How a weekend golfer might choose

Match the putter to the stroke, then to the budget. If your stroke has some arc and you want a traditional blade, look at the Scottsdale Anser, the HB SOFT 2 #1, or the Ai-DUAL #1. If you want a face designed to stay squarer, look at the HB SOFT 2 #15, the Jailbird, or the DF3, and spend a little time on setup. If you have not rolled both shapes for more than an aisle session, do that before you pick a camp. A fitting, or a long session with two heads, will tell you more than a forum will.

Who should skip this

Skip a new putter if the one you have is a reasonable length and you are peeking before the ball is gone. A $400 mallet will not close your eyes for you. Skip the blade-versus-spaceship argument if you have not tried both. And skip a zero-torque head if you only want it because it is the current conversation.

FAQ

Is a mallet always more forgiving?

On paper, a larger, higher-MOI mallet is usually described as more stable on off-center hits. That is a published design goal, not a made-putt guarantee. A blade can still be the better putter if you aim it better and roll it on line.

What is toe hang, in one sentence?

It is how much the toe of the putter wants to hang down when you balance the shaft, and makers use it as a shorthand for how much face rotation the head is built to allow.

Do I have to buy a zero-torque mallet?

No. It is one modern answer to a squarer face, not a requirement. Traditional face-balanced mallets, such as the HB SOFT 2 #15, are a simpler and cheaper version of the same basic idea.

Can I decide from a product photo?

You can narrow the list. You cannot finish the decision. Roll a blade and a mallet, at the correct length, before you spend $200 or $400 on a shape you have only seen online.