Best Drivers for Slicers

A draw-biased driver is a bias, not a personality transplant. A research-based look at the Cobra OPTM MAX-D, PING G440 SFT, and Callaway Quantum Max D, with prices as of Nov 20, 2026.

Share
Golf Deal Hunter branded title card for "Best Drivers for Slicers." Forest-and-gold graphic, no product photo.

Golf Deal Hunter may earn a commission from links on this page, at no extra cost to you.

This is a research-based buying guide. The notes below come from published manufacturer and retailer specs, official product pages, and widely reported product details. We have not hands-on tested these products, and we are not inventing review scores or quotes.

A slice is the most expensive way to tour the right side of a hole you have already paid to play. A draw-biased driver will not invent a swing path. It can, on paper, move weight toward the heel, close the face a little easier, and take some of the right-side curve out of a miss. That is a bias, not a personality transplant.

The three current heads below are the models makers actually describe as draw or straight-flight designs. This is not a ranked slice test. For a wider 2026 driver field, including more neutral heads, see our 2026 driver guide. For last year's heads and used listings, see our new vs. used driver guide.

Approximate prices as of Nov 20, 2026, and marked with a tilde (~). Some figures are sale prices that can end. Re-check the retailer page before you buy.

Quick picks

DriverPublished slice-correction ideaStock loftsApprox. price
Cobra OPTM MAX-DDraw-biased 460cc head with a fixed 11-gram heel weight10.5° and 12°, plus FutureFit33 adjustability~$399 (sale; regular $599)
PING G440 SFTStraight-flight model with a two-position Draw / Draw+ 23-gram back weight9° and 10.5°~$448.98 (sale; was $619.99)
Callaway Quantum Max DInternal heel weighting for a slight draw bias and slice reduction9°, 10.5°, and 12°, all adjustable~$449.99 (sale; regular $649.99)

What “draw-biased” actually means

For a right-handed golfer, a slice starts right, curves right, or both. Draw-biased and “straight flight” heads try to help the ball start closer to the line, or curve less in that direction, by putting more weight in the heel or by offering a heavier draw setting. Cobra's MAX-D uses a fixed 11-gram heel weight. PING's SFT uses a 23-gram back weight in Draw or Draw+ positions. Callaway's Quantum Max D uses internal heel weighting and describes a slight draw bias.

Loft still matters. A 9° head that you cannot launch is a very expensive line drive, even if it is built to fight a slice. A 10.5° or 12° option is often the more honest starting point for a weekend swing. Shaft flex and a slightly more upright lie, when the hosel allows it, are the other usual fitting levers. A more neutral driver with a sliding weight parked in the draw setting — such as the standard Quantum Max in our 2026 driver guide — can be enough if the slice is mild.

Cobra OPTM MAX-D

The OPTM MAX-D is Cobra's slice-correction driver in the OPTM family, and the lowest verified new-driver price in this group. The official page describes a 460cc oversize shape, a fixed 11-gram heel weight that moves the center of gravity closer to the hosel, and a draw-biased design meant to help the face close and reduce side spin on misses. FutureFit33 offers 33 loft and lie settings, with ±2° of adjustment and a SMARTPAD system Cobra says keeps the face square at each setting. Stock lofts include 10.5° and 12°, with a wide fitted loft range.

Official price as of Nov 20, 2026: ~$399, down from $599.

Pros (from published specs)

  • The lowest verified sale price here, with an explicit heel-weighted draw design
  • A 12° stock loft, which many weekend slicers will want to look at
  • Wide FutureFit33 loft and lie adjustment

Cons (from published specs)

  • The heel weight is fixed, not a sliding or removable draw-plus setting
  • 33 settings can become a rabbit hole without a fitting

Check price — Cobra OPTM MAX-D via Cobra

PING G440 SFT

The G440 SFT is the model PING points slice-correction shoppers toward. Superstore and PING materials describe a two-position Draw / Draw+ 23-gram back weight, lofts in 9° and 10.5°, an 8-position Trajectory Tuning 2.0 hosel (±1.5° loft, lie up to 3° flatter), a CarbonFly Wrap crown, and the G440 family's deeper center of gravity and shallower, thinner face. PING's ALTA CB Blue stock shaft is listed at 46 inches, a quarter-inch longer than the previous model.

Street price at PGA TOUR Superstore as of Nov 20, 2026: ~$448.98, down from $619.99. There is also a G440 SFT HL on PING's official site for slower swings; we did not verify a separate Superstore checkout price for that HL build, so it is not a priced pick here.

Pros (from published specs)

  • A dedicated straight-flight head with a published Draw and Draw+ weight setting
  • The same current Superstore sale neighborhood as the G440 MAX

Cons (from published specs)

  • Only two lofts (9° and 10.5°), unlike the 12° options on the Cobra and the Quantum Max D
  • If you already hook it, Draw+ is the wrong neighborhood

Check price — PING G440 SFT via PGA TOUR Superstore

Callaway Quantum Max D

The Quantum Max D is Callaway's 2026 dedicated draw driver. The official page says it is designed for easy launch and maximum forgiveness, with internal heel weighting “to help promote a slight draw bias for slice reduction and draw enhancement.” It uses the same Tri-Force face story as the rest of the Quantum family — titanium, Poly Mesh, and carbon fiber — plus next-generation AI-optimized face mapping and an OptiFit hosel with eight loft and lie configurations. Stock lofts are 9° and 10.5° in right and left hand, and a 12° head in right hand, all adjustable. Standard length is 45.75 inches, lie 59.0°, volume 460cc.

Official price as of Nov 20, 2026: ~$449.99, regularly $649.99. That is the same sale neighborhood as the standard Quantum Max in our 2026 driver guide, but this is the head Callaway actually labels as the slight-draw model.

Pros (from published specs)

  • A dedicated 2026 draw head, with a 12° right-hand stock option
  • $200 off the regular $649.99 official price
  • Independent loft and lie adjustability, if you want to fine-tune the bias

Cons (from published specs)

  • Callaway describes the bias as slight; it may not be enough for a severe slice
  • About $50 more than the Cobra official sale

Check price — Callaway Quantum Max D via Callaway

How a weekend golfer might choose

If the budget is the point and you want a 12° draw head, start with the OPTM MAX-D at ~$399. If you want a heavier draw setting you can click into Draw+, look at the G440 SFT — and be honest about whether you also need a 12° loft you will not get in that model. If you want a 2026 Callaway with heel weighting and a 9°, 10.5°, or 12° stock head, the Quantum Max D is the dedicated option. A fitting, or a session on a monitor, still beats buying a “slice killer” from a photo.

Who should skip this

Skip a draw-biased driver if you already hook it, or if the slice is really a 9° head you cannot launch. Skip it if the driver you have is a reasonable loft and the miss is a swing you have not practiced. And skip the latest crown if a last-year draw head, in the right loft and shaft, is hundreds cheaper — that comparison lives in our new vs. used driver guide.

FAQ

Will a draw driver fix my slice?

No one should promise that, and we will not. These heads are built to help a right-handed ball flight move less to the right. Path, face angle, and strike still run the show. A lesson can be cheaper than a wrong new driver.

Is a higher loft better for a slice?

Often, a more reasonable loft is better for launch and spin, which can make a tee shot easier to keep in the air. It is not a slice cure by itself. Look at 10.5° or 12° if you struggle to launch a 9°, then let a fitter confirm it.

What about the standard Quantum Max or G440 MAX?

Those are more neutral, or only mildly adjustable toward a draw, and they are covered in our 2026 driver guide. Buy them if you want forgiveness without a dedicated slice head. Buy the SFT, MAX-D, or Max D if the miss is clearly right and you want the model the maker built for that miss.

Should left-handed golfers read this the same way?

The geometry flips. A draw bias for a lefty is meant to fight a miss to the left. Check each model's left-hand availability: the Quantum Max D lists 9° and 10.5° in left hand, but the 12° as right hand only on the official page we checked.